How to Fix HP Printers Communication Error Messages?

Disruptive communication between your computer and HP printer can result in much bad printing, probably due to communication problems between printer and computer, it is impossible to print perfectly. Communication errors are one of the common errors of HP printer that appears more frequently. There, you can find HP printer support in order to deal with the communication problem of HP printer, connect with the reliable helpdesk.

Here are few symptoms that are noticeable during the communication problem of HP printer-

• Printout looks garbled or shows unexpected symbols.
• Pages are picked up and ejected blank.
• There is no response from the printer when a print job is sent.
• Communication error messages are displayed on the PC screen.
• Bidirectional communication cannot be established.

Check out some of the suitable solutions steps in order to deal with the HP printer problem-

Step 1:

• First of all, you need to simply disconnect the USB cable or parallel cable from the rear of your printer or All-in-One product. Further, print a self-test report in order to verify that the printer is working on standalone mode or not. 
• Now, you have to reconnect the USB cable and other parallel cables. Then try printing again. If the printer starts printing, it means that the problem is with the cable. 
• You can also try to disconnect the power cord from the outlet and wait for few minutes and then reconnect the power cord. Further, restart your computer and perform printing. 

Step 2:

• Moreover, ensure that there no external devices are sharing the USB or parallel port with your printer. Try to remove any external devices, and then connect the printer directly to a USB or parallel port.
• One more thing that needs to be to take care is that the cable should not be too long. 
• Look for the devices around the USB or parallel cable that can be the reason behind the electromagnetic interferences. Power off the devices near the cable and then restart the print job. 

Step 3:

• In case the problem still exists, simply disable the bidirectional communication between the printer and the computer. 
• If your printer or All-in-One product is connected to a parallel port, ensure that the below requirements are met:
• The parallel cable must be IEEE-1284 compliant. This standard provides a better protection against electromagnetic interferences.
• The parallel port mode must be set to ECP.
• Further, you have to uninstall the HP software and then download the latest version of the software. Now, install it on your computer again.

For more help and support, feel free to connect with our technical support service via HP printer technical support phone number +1-866-505-7911. Here, you can get instant help and support from the team of experts and IT technicians who are capable enough to deal with any complicated issues at any complex level associated with HP printer.